Science Fiction Modellbau Forum
Science Fiction Modellbau => Anime und Mecha => Thema gestartet von: dizzyfugu am 22. Juni 2015, 09:27:34
-
Sooo, nach langer Zeit wieder etwas, das es sich hier zu posten lohnt. Im Moment läuft ein Group Build mit dem Titel "De-/Militarize it" auf whatifmodelers.com, und den ersten Beitrag dazu habe ich bereits durch (ein Umbau einer Martin B-26 zu einem zivilen Reiseflugzeug der 50er). Da aber noch genügend Zeit ist (läuft bis Ende August) und ich dieses Projekt eigentlich schon lange auf der Pfanne hatte, habe ich mir einen Ruck gegeben, einen Basis-Bausatz organisiert und die Säge angeschmissen.
Es geht um den Umbau eines "Brocken" Labor (seines Zeichens ein Bundeswehr-Fahrzeug zur Verteidigung der innerdeutschen Grenze in den Neunzigern) zu einem... Feuerwehrgerät.
Das ist nicht so absurd wie es klingt, denn Patlabor ist zwar eine SF/Roboterserie, aber nicht so grellbunt und exotisch wie etwa Gundam. Die Patlabor-Mechas sind sehr "realistisch" und eher schweres Arbeitsgerät - viele in zivilen Rollen wie am Bau, als Lade-Fahrzeuge, bei der Polizei (daher auch der Serien-Name) oder beim Militär - und auch bei der Feuerwehr, wie der ARV-99:
(http://www.mahq.net/mecha/patlabor/patlabortv/arv-99.jpg)
Von: www.mahq.net
Den will ich nicht nachbauen, sondern eine eigene Interpretation des Themas auf der Basis eines Brockens aufbauen:
(http://www.hobbyxstyle.com/BaseProductImages/984/s400-1-60_pat_brocken_labor_.jpg)
Von: www.hobbyxstyle.com
Dazu gehören Änderungen an der Karosserie, ein komplett neuer Kopf, natürlich eine Menge Spezialausrüstung und ein passender Anstrich in RAL 3000. ;D
Mal sehen, was wird...
-
:thumbup: coole Sache. Da bin ich dabei.
-
Erste Schritte: das "Endoskelett" für den Unterleib; wird zwar alles "nur" zusammengesteckt, aber man sollte schon achtgeben, dass die Teile richtig herum sitzen. So haben die Hüften z. B. eine leicht offene Stellung:
(https://c1.staticflickr.com/1/312/18870734430_f6d1af52cf_z.jpg) (https://flic.kr/p/uKxrUb)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uKxrUb) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Die Füße mit den Knöchelgelenken; bleiben wohl OOB:
(https://c1.staticflickr.com/1/278/18435915374_43141cc950_z.jpg) (https://flic.kr/p/u67TkU)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/u67TkU) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Weitere Körper-Einzelteile im Rohbau: Endoskelett-Teile für die Arme & Schultern, Teile jenseits der Silikon-Hussen oberhalb des Ellenbogens und (Experten erkennen's sofort ;)) der frühere Kopf eines 1:100 Macross Destroid Phalanx, der bald als Scheinwerferbatterie auf einer der Schultern landen wird:
(https://c1.staticflickr.com/1/272/18437753683_17897b94d6_z.jpg) (https://flic.kr/p/u6hiNT)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/u6hiNT) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Patlabor ist wirklich ein feine Serie, der realistische Zugang ist da wirklich mal was anderes.
Da bin ich bei Dir. Der "Look und Feel" des Patlabor-Universums ist ziemlich einzigartig, und mir gefällt insbesondere, dass die Labors einfache Alltags-Fahrzeuge sind, wie LKWs oder Gabelstapler. Zwar SF, aber sehr subtil - und mittlerweile richtig retro, wenn man bedenkt, dass die Sachen in den 80ern erdacht worden sind und in den 90ern spielen. Insofern ist es spannend, sich mit dem Design eines solchen "Gerätes" für brandtechnische Zwecke auseinander zu setzen. Kanonen dranschrauben kann ja jeder! ;)
So bekommt meiner einen Tank auf dem Rücken, ordentliche Blaulichter (auf den Schultern, wie bei den Polizei-Labors, aber kompletter Eigenbau), zwei Löschkanonen (eine kleine, halb versenkt am rechten Unterarm und was Größeres auf die linke Schulter) und eine ausfahrbare Abriss-Zange an den linken Unteram - wenn's klappt wird das Ding sogar beweglich/ausziehbar!
Wie bereits oben erwähnt habe ich schon lange über dieses Projekt gegrübelt und Ideen gesammelt, insofern geht es flott voran (wie üblich, wenn ich was angehe) - auch wenn es hie und da Experimente gibt, das ist aber 'Trial and Error' am lebenden Objekt.
-
So, es gibt was Neues zu sehen. Da es ein moderner Mecha-Bausatz ist, können viele Elemente glücklicherweise parallel gebaut und bemalt werden, um sie erst zum Schluss zusammenzustecken.
Hier die neue Brust-Sektion - das Implantat ist ein Schulter-Panzer eines 1:144 Gundam Zaku:
(https://c1.staticflickr.com/1/361/19084949092_ca7111b6e9_z.jpg) (https://flic.kr/p/v5tmsq)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/v5tmsq) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Dieser CO2-Tank kommt auf den Rücken (von einem Dorvack PA Kit, dem "Berlon"). Leider muss das Ding quer gesetzt werden, dafür müssen aber die Lüfter weg bzw. verschlossen werden.
[http://(https://c1.staticflickr.com/1/277/19093880871_4c738992e8_z.jpg) (https://flic.kr/p/v6g8yB)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/v6g8yB) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Neues von den Füßen, es geht aufwärts. Die Füße sind vorsorglich schwarz sprühlackiert, weil man später kaum noch unten in die Beine kommen wird. Die Knie werden noch verändert, gekappt und mit Zusatzpolstern oder -bügeln versehen.
[http://(https://c4.staticflickr.com/4/3933/19064377306_0336fe188a_z.jpg) (https://flic.kr/p/v3DVbs)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/v3DVbs) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Und nun bitte KEINE kreativen Kommentare zu der "Gummihose" für den Unterleib bzw. der Halte-Methode. Hier wird NUR mit Acrlyfarbe versucht, das Gummi dunkler zu bekommen und die Falten zu betonen... ;)
[http://(https://c1.staticflickr.com/1/416/18902935058_38200ca07f_z.jpg) (https://flic.kr/p/uNou2q)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uNou2q) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
[http://(https://c1.staticflickr.com/1/438/18902874070_386bcb6954_z.jpg) (https://flic.kr/p/uNoaTU)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uNoaTU) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Mehr Fortschritte. Einmal ein Blick in den Oberkörper mit den Schulter- und Hüftgelenken:
(https://c1.staticflickr.com/1/446/18935300428_b65a2331dd_z.jpg) (https://flic.kr/p/uRfn83)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uRfn83) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
...und der Torso, mit neuem Cockpit (Teil eines Turmes einer 1:1200 Bismarck!), sowie Eindrücke vom gescratchten (noch WiP) Kopf: bei 21 Einzelteilen habe ich erst einmal aufgehört zu zählen... :0
(https://c1.staticflickr.com/1/484/18936769449_5eab5eeec2_z.jpg) (https://flic.kr/p/uRnTNZ)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uRnTNZ) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/410/18935302808_4ef1181117_z.jpg) (https://flic.kr/p/uRfnQ5)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uRfnQ5) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Läuft... ;D
Heute kam auch der Spender für die Abrisschere, mal sehen, was geht und wie sich das Ding implantieren lässt. :evil6:
-
Ich bin gespannt, was du da kreierst ;)
Einfach krasse Sache :respekt:
-
Spachtel-Orgien! Yeah! ;D
-
Na ja, Anspruch ist, dass man den Brocken als Basis später zumindest auf den ersten Blick nicht mehr erkennt. Der Kopf macht dabei eine Menge aus, und der Schulterbereich wird später recht voll werden - das Ding wird stämmiger wirken.
-
Cooler Build und schöner Anfang! :thumbup: :thumbup: :thumbup:
-
Neues zum gucken: der (fast fertige) neue Kopf - mit dem Versuch, das Ding hinten wie einen Nackenschutz beim klassischen Feuerwehrhelm auslaufen zu lassen. Geht aber nicht wirklich, weil der Brocken einen recht massiven Kragen an der Stelle am Rumpf trägt. aber immerhin... :0
(https://c1.staticflickr.com/1/255/18994795079_9056bf8ca7_z.jpg) (https://flic.kr/p/uWvhNT)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uWvhNT) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/553/19180931165_e9fb19a353_z.jpg) (https://flic.kr/p/vdXhzK)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vdXhzK) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/383/18993256390_43280b9202_z.jpg) (https://flic.kr/p/uWnppL)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uWnppL) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Unterleib und Beine:
(https://c1.staticflickr.com/1/406/19154798506_8c5d57c98a_z.jpg) (https://flic.kr/p/vbDmfE)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vbDmfE) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/513/18558409944_5fe014178e_z.jpg) (https://flic.kr/p/ugWGHf)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/ugWGHf) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Und erste Schritte am rechten (mit Wasserspritze) und linken (mit der ausziehbaren Schere) Unterarm; in beiden Fällen wird ein Styrolprofil im Arm versenkt, und der Rest entwickelt sich. Wie alles an diesem Umbau. ;D
(https://c1.staticflickr.com/1/318/19184509571_486f39abdf_z.jpg) (https://flic.kr/p/vegCjp)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vegCjp) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/424/19154788436_a1e41b05cd_z.jpg) (https://flic.kr/p/vbDig3)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vbDig3) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Krasse Nummer, Dizzy...!!!
Freue mich auf Firtschritt 😬
-
Vielen Dank, Motivation tut gut!
-
À propos Motivation: neues von der Baustelle. Langsam geht es in die Detailarbeiten. Zu einer ordentlichen Feuerwehr gehört ja auch Blaulicht, und das muss improvisiert werden. In diesem Fall aus Stücken von Schutzhauben für Zahnbürsten, Teile von klaren Spritzlingen für die Lampen an sich und Styrolplatten und -profilen. Simpel, aber effektiv! ;D
(https://c4.staticflickr.com/4/3935/19022294740_83a9c6cbac_z.jpg) (https://flic.kr/p/uYWeuY)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uYWeuY) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/354/19209930795_a2f07c8fb1_z.jpg) (https://flic.kr/p/vgvVan)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vgvVan) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/343/19183816526_0b2c6c2330_z.jpg) (https://flic.kr/p/ved5im)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/ved5im) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/495/19209929375_44f42710b3_z.jpg) (https://flic.kr/p/vgvUJT)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vgvUJT) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
einfach aber effektiv - in derTat 👍
-
Die Arme... neue Hände/Fäuste habe ich dem Umbau nun auch spendiert, denn die Originalteile sind - dem Militäreinsatz geschikdet - recht simpel: es gint nur Daumen, Zeigefinger, und der Rest ist ein komplettes Teil - quasi Fäustlinge mit Finger für den Abzug: genug, um eine Wumme zuhalten und abzudrücken, aber nichts für Rettungsaktionen wo auch mal Gröberes weggeräumt werden muss.
Auf artikulierte Gundam-Hände von Kotobukiya (1:100 müsste passen) wollte ich nicht extra warten, daher also Spenderhände. In diesem Fall Fäuste eines 1:100 Macross VF-1 Gerwalks. Die Dinger sind recht üppig dimensioniert (VIEL zu groß für die Walküre, von der sie tammen), aber das passt insgesamt zur massiven Optik meines Umbaus. Außerdem werden die Öffnungen der Unterarme gut gefüllt/verdeckt. ;D ;)
(https://c1.staticflickr.com/1/516/19202399226_4d869d5000_z.jpg) (https://flic.kr/p/vfRjhJ)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vfRjhJ) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Außerdem Fortschritte von der ausziehbaren Abrisszange am linken Arm:
(https://c1.staticflickr.com/1/279/19040853130_6321a382fe_z.jpg) (https://flic.kr/p/v1zmgd)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/v1zmgd) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/527/19202395536_aa20a597e4_z.jpg) (https://flic.kr/p/vfRic7)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vfRic7) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Die Zange selber ist ein Druckguss-Teil und stammt von einem HO-Bagger aus Metall. Leider ist die Zange ein Teil, aber immerhin sitzt sie auf einem drehbaren Sockel, den ich übernehmen konnte.
-
Wieder was Neues... Rohbau der großen Wasserkanone für die linke Schulter:
(https://c1.staticflickr.com/1/562/18649521113_bc2f5195f0_z.jpg) (https://flic.kr/p/upZETt)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/upZETt) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Impressionen vom Oberkörper - einmal von vorne, mit Armen und Kopf am Platz (aber immer noch alles WiP):
(https://c1.staticflickr.com/1/377/19273942951_6118b908a3_z.jpg) (https://flic.kr/p/vnaZKe)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vnaZKe) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
...und der Rücken - ich habe, da ich für das Projekt günstig einen bunten Schrottbestand an Feuerwehrteilen in 1:32 erstanden habe, ein Pumpen- und Verteilersystem zu montieren, zusätzlich zum quer liegenden CO2-Ttank, der mir etwas einsam vorkam:
(https://c1.staticflickr.com/1/368/19082466000_72564a7e8c_z.jpg) (https://flic.kr/p/v5fCju)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/v5fCju) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
...und nochmal dasselbe - aber mit der weiter bearbeiteten Wasserkanone und der Scheinwerfer-Phalanx auf den Schultern:
(https://c1.staticflickr.com/1/307/19082476968_5668284174_z.jpg) (https://flic.kr/p/v5fFzA)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/v5fFzA) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Muahahaha!
-
Wieder Neuigkeiten... z. B. freistehende Hydraulik-Kolben für den Kopf:
(https://c1.staticflickr.com/1/316/19294762152_b14f61ed51_z.jpg) (https://flic.kr/p/vp1GyY)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vp1GyY) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Die Unterarm-Wasserkanone:
(https://c2.staticflickr.com/4/3913/19113174988_a920a1f795_z.jpg) (https://flic.kr/p/v7Y22N)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/v7Y22N) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Eine gescratchte Winde, und es kommen Stoßfänger an diverse Stellen, die neuralgisch erscheinen:
(https://c1.staticflickr.com/1/327/19300734215_494c24de65_z.jpg) (https://flic.kr/p/vpxiRz)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vpxiRz) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Und der Kopf in finaler Mutation - knapp 30 Einzelteile stecken da drin...
(https://c2.staticflickr.com/4/3856/19300732155_7f4bcb1766_z.jpg) (https://flic.kr/p/vpxif4)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vpxif4) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Wow... da schliess ich mich Dir gerne an: MUAHAHA! ;D
-
Nochmal was Neues, die Temperaturen (wir kratzen hier an den 40°C...) verhindern aber größere Arbeiten.
Dennoch ein Update vom Rumpf, mit mehr Stoßfängern, und langsam werden es mehr und mehr Scheinwerfer:
(https://c1.staticflickr.com/1/382/18707979653_ce88989cc4_z.jpg) (https://flic.kr/p/uvahzk)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uvahzk) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/343/19140997698_501a0b0f53_z.jpg) (https://flic.kr/p/vaqBKG)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vaqBKG) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Die Knie sind oben gekappt, verschlossen, und die massiven Stoßfänger sorgen auch untenrum für eine massivere Optik.
(https://c1.staticflickr.com/1/365/19302504436_a4a3c3628a_z.jpg) (https://flic.kr/p/vpGo5C)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vpGo5C) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Und eine finale Frontansicht, mit noch mehr Scheinwerfern ;D
(https://c1.staticflickr.com/1/349/18707975663_4111eb35f6_z.jpg) (https://flic.kr/p/uvagox)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uvagox) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Langsam geht es ans Bemalen. Der Plan ist rundum RAL 3000, mit ein paar schwarzen Flächen (z. B. Füße). Dazu werden gelbe Rally-Streifen kommen, und vermutlich eine englischsprachige Beschriftung. Bin mir unsicher, ob es ein deutsches Vehikel werden soll - ggf. ein Wettbewerber zum ARV-99 Rescue Labor (s .o.), der es dann schließlich in Dienst bzw in die TV-Serie geschafft hat? ;)
-
die labor sidn sowie so cool ohne ende aber nen feuerwehr labor ist mal genial
und deiner hat sos chöne plausible details da amcht jedes bild lust auf mehr
-
Danke sehr. So ein Umbau lebt ja von solchen Details - der Zweck wird dadurch "deutlich", und es hilft, die Optik vom Basisbausatz abzugrenzen.
Es gibt/gab ja "echte" Feuerwehr-Labors, aber leider keinen Bausatz, nicht mal Short Run. Insofern könnte das hier richtig gut werden... :)
Überlege auch, ob ich ihm eine Base spendiere. Alle Labors, die ich bis dato gebaut habe, haben eine 20x20cm-Platte (bis auf den Gryphon, der fliegt...) - hier würden ja Schutt und verkokelte Trümmer reichen. Mal sehen, erst mal das Modell.
-
Minimaler Fortschritt (*Schwitz*): mehr "Fleisch" an den Oberschenkeln und die Schultergeräte am Platz - es wird durchaus eng...
(https://c1.staticflickr.com/1/463/19198717919_877e83207f_z.jpg) (https://flic.kr/p/vfwrXV)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vfwrXV) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/547/19197325048_41d7bbf298_z.jpg) (https://flic.kr/p/vfpiUU)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vfpiUU) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Detailarbeit an der Abbruchschere, bzw. deren Aufnahme...
(https://c1.staticflickr.com/1/431/18782036374_fdb7854ab1_z.jpg) (https://flic.kr/p/uBGR4m)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uBGR4m) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
...während der Rest nach und nach in RAL 3000 getaucht wird:
(https://c1.staticflickr.com/1/490/19378489046_06d2e36871_z.jpg) (https://flic.kr/p/vwpPE7)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vwpPE7) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/513/19408702641_3020e64a0f_z.jpg) (https://flic.kr/p/vz5F7a)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vz5F7a) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/526/19218368779_d6813f77e2_z.jpg) (https://flic.kr/p/vhgatR)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vhgatR) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Grundierung in Rot ist durch, und ein erstes Tusche-Washing ist auch schon drüber:
(https://c4.staticflickr.com/4/3666/19242954388_03f67239ee_z.jpg) (https://flic.kr/p/vjraVE)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vjraVE) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/261/19424253402_8d6c820954_z.jpg) (https://flic.kr/p/vAsnNJ)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vAsnNJ) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/275/19434736141_ae8bd1fec7_z.jpg) (https://flic.kr/p/vBo6XB)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vBo6XB) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Erstaunlich, wie viel Oberfläche so eine Figur hat, und dass die Farbe bei 30°C Raumtemperatur praktisch auf dem Pinsel wegtrocknet hilft auch nicht wirklich... :P
Es gibt noch viel zu tun, z. B. wir die Halsöffnung noch mit Plane (Taschentuch mit Weißleim) ausgekleidet, Aufkleber müssen drauf, die Scheinwerfer werden "gefüllt" (Silberlack, schwarze, dünne Fineliner-Streifen und dann weiße Glasmalfarbe drüber), mehrere Leitungen müssen verlegt werden und die großen Flächen werden noch "geshaded", um mehr Kontrast in die Hütte zu bekommen. Bis dato sieht es aber ganz gut aus.
-
Zur Info, die drei grundtöne für die Pinselbemalung. Grundfarbe ist Revell 330 (= RAL 3000), dazu Humbrol 132 für hellere Flächen und etwas Humbrol 100 für trockenbemalte Highlights und Kanten.
(https://c1.staticflickr.com/1/280/19282944690_cdf91d994c_z.jpg) (https://flic.kr/p/vnY8DC)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vnY8DC) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Der "Kragen" wird mit in Weißleim getunktem Taschentuch gefüllt...
(https://c1.staticflickr.com/1/305/19284364869_3e1d805c2e_z.jpg) (https://flic.kr/p/vo6pPt)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vo6pPt) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Der untere Torso bei der Kosmetik - u.a. hat die "Gummihose" ein Touch-up in puncto Acryl-Washing erhalten.
(https://c1.staticflickr.com/1/271/19474795701_5037203c51_z.jpg) (https://flic.kr/p/vEVqgF)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vEVqgF) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
...und die Abbruchzange beim Trockenbemalen. Dafür, dass das Ding ein Gußteil aus Metall ist, sieht es echt gut aus - auch die Größe ist glücklich (Fotos am Arm später ;)):
(https://c1.staticflickr.com/1/276/19282920638_afb5cf7c3e_z.jpg) (https://flic.kr/p/vnY1uW)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vnY1uW) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Läuft... :police:
-
Kleine Fortschritte an allen Fronten:
(https://c4.staticflickr.com/4/3810/19503025811_f5992c0cc6_z.jpg) (https://flic.kr/p/vHq76H)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vHq76H) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/432/19503020401_a87ec9dc0b_z.jpg) (https://flic.kr/p/vHq5ur)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vHq5ur) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/498/19312335739_d9a1ca0cdb_z.jpg) (https://flic.kr/p/vqyLzR)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vqyLzR) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/286/18878005983_f39dc8d2b0_z.jpg) (https://flic.kr/p/uLbHtM)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/uLbHtM) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://c1.staticflickr.com/1/547/19312339129_8a11a702f0_z.jpg) (https://flic.kr/p/vqyMAi)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vqyMAi) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Geil!
-
Sackcool!
-
Vielen Dank für den moraalischen Support. Gestern kamen Aufkleber drauf - gelbe Markierungen - und ich bastele an einer Story dafür. Wird wohl einer von zwei Prototypen werden, der von Schaft Europe nach Japan für eine Ausschreibung der Tokioter Feuerwehr für einen Rettungs-Labor gesandt wurde. ;)
-
Es wird konkreter - zwar noch keine Decals, aber man erkennt langsam, was der Teilesalat werden soll:
(https://farm1.staticflickr.com/559/19341621189_cd805f80d3_z.jpg) (https://flic.kr/p/vt9S8p)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vt9S8p) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/348/19532364311_afcd54c470_z.jpg) (https://flic.kr/p/vL1tpV)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vL1tpV) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/444/19528110415_80a7a77c5f_z.jpg) (https://flic.kr/p/vKCEST)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vKCEST) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/410/19502004986_b772255d38_z.jpg) (https://flic.kr/p/vHjSDh)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vHjSDh) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/403/19532367801_b53528dc39_z.jpg) (https://flic.kr/p/vL1us6)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vL1us6) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/406/19521443552_ea6e7039ae_z.jpg) (https://flic.kr/p/vK3v3Y)Patlabor +++ 1:60 Fire-fighting Labor (Whif/Brocken conversion) - WiP (https://flic.kr/p/vK3v3Y) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Antliches Gerödel am bebeinten Hydrant 👍
-
„O heiliger St. Florian, verschon mein Haus, zünd andre an.“
;D
Cooler Bau, sehr nice... :thumbup:
-
Antliches Gerödel am bebeinten Hydrant 👍
Wart' mal ab, wenn der Oberkörper komplett ist und die Leitungen verlegt sind. Dann wird daraus ein Schweizer Messer mit Nassanschluss! ;D
-
Hihihi ;D
-
Gute Nachrichten: gestern war qausi Jungfernfahrt - Alle Teile das erste Mal zusammen, und ich bin positiv angetan. Proportionen stimmen (trotz der ganzen Auf- und Anbauten), es sind noch ein paar Kleinigkeiten wie Halterungen für die Zuleitung des C-Rohrs am rechten Arm notwendig (schlackert im Moment in der Landschaft herum - beim Klettern in Trümmern eher unpraktisch :0), aber insgesamt kommt der Florian richtig massiv rüber. Das Orange-Rot sieht auch ungewohnt aus, funktioniert m. E. aber. Juchhu.
-
Währenddessen... der Versuch die Spannung hochzuhalten und noch ein paar WiP-Bilder nachzuschieben, von den Füßen und den Decals:
(https://farm1.staticflickr.com/317/19392182058_4e1ca525b9_z.jpg) (https://flic.kr/p/vxC17w)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vxC17w) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/337/18957587244_df0b09295b_z.jpg) (https://flic.kr/p/uTdAdu)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/uTdAdu) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm4.staticflickr.com/3708/19580127055_391d21bc15_z.jpg) (https://flic.kr/p/vQegBv)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vQegBv) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/513/19573265912_2ffc4eefdb_z.jpg) (https://flic.kr/p/vPC72W)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vPC72W) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/545/19392176730_3b0f5f1978_z.jpg) (https://flic.kr/p/vxBYwE)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vxBYwE) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/318/19393572619_88d9ba2a56_z.jpg) (https://flic.kr/p/vxK8tH)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vxK8tH) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
-
Das mit den Gummizügen (?) in den Füssen kommt sehr 8). Ist gespeichert! ;D
-
Hammer! :thumbup:
-
Wird immer besser :respekt:
-
Das mit den Gummizügen (?) in den Füssen kommt sehr 8). Ist gespeichert! ;D
Ja, sehr vielseitig, das Zeug. Kurzwaren sind zu etwas tauge... ;)
-
Wo wir gerade dabei sind: Neues vom Oberkörper und dem Schulter-Wasserwerfer:
(https://farm1.staticflickr.com/295/18980226253_e0c917748e_z.jpg) (https://flic.kr/p/uVdC1e)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/uVdC1e) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/432/19594226592_f76ebe895a_z.jpg) (https://flic.kr/p/vRtwUY)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vRtwUY) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/562/19413187070_6ccf71ecbe_z.jpg) (https://flic.kr/p/vztEaU)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vztEaU) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm1.staticflickr.com/416/19594221212_07952df74a_z.jpg) (https://flic.kr/p/vRtvjd)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vRtvjd) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm4.staticflickr.com/3781/18980220853_141058f7e8_z.jpg) (https://flic.kr/p/uVdAp8)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/uVdAp8) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
(https://farm4.staticflickr.com/3735/18980222003_e1c939a427_z.jpg) (https://flic.kr/p/uVdAJX)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/uVdAJX) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Und, schließlich, das erste Mal auf eigenen Füßen und alles Wichtige zusammengesetzt! :spielberg: "Erhebe Dich, Kreatur! Muahahahaha!"
(https://farm1.staticflickr.com/292/19594219752_56feced5e9_b.jpg) (https://flic.kr/p/vRtuT3)Patlabor +++ 1:60 Schaft Industries Europe Type-8FF 'Florian' Fire-Fighting Labor Prototype; Tokyo, late 1999 (Whif/Brocken conversion) - WiP (https://flic.kr/p/vRtuT3) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Immer noch einiges zu tun, aber das Gesamtbild und die Proportionen stimmen, trotz der vielen Anbauten. :thumbup:
-
...und fertig!
(https://farm1.staticflickr.com/459/19619591362_7ace9d371e_b.jpg) (https://flic.kr/p/vTHwYA)Patlabor +++ 1:60 Schaft Enterprise Europe Type-8FF "Florian One" Rescue Labor, prototype proposed to the Tokyo Fire Department, 1999 (Whif/modified 'Brocken'Bandai kit) (https://flic.kr/p/vTHwYA) by dizzyfugu (https://www.flickr.com/photos/dizzyfugu/), on Flickr
Weitere Bilder und ein Hintergrund auf Basis mir bekannter Fakten aus dem Patlabor-Universum gibt es hier:
http://www.phoxim.de/forum/index.php?topic=15232.0
-
Super Arbeit, Kompliment :thumbup: :respekt:
-
Danke Dir! :headbang:
-
Anfangs konnte ich mir so gar nichts bei den ersten Bildern vorstellen. Jetzt find ich den Florian richtig 8)
Das wäre doch mal ein "Maskottchen" für unsere Feuerwehren ;D
Jedenfalls "Sau stark"
-
Sehr schöner Florian! :thumbup: Du hast den Feuerwehr-Charakter wunderbar eingefangen! :thumbup: :respekt:
-
Nochmals vielen Dank an alle!